plug receptacle series wg = 3-row, right-angle, plug, mounting ears wg = 3-row, straight, receptacle, mounting ears wg = 3-row, right-angle, receptacle, mounting ears number of contacts 160, 208 160, 208 type of contacts ? the contact type determines image of connector. pin right-angle contacts are always plug image, all other contacts, straight p in or sockets are receptacle image. see page w-38 to switch image. pr7 = pin, right-angle, dip solder, .109 sac = socket, straight, solder cup pr9 = pin, right-angle, dip solder, .140 sad7 = socket, straight, dip solder, .109 pr11 = pin, right-angle, dip solder, .172 sad9 = socket, straight, dip solder, .140 sad11 = socket, straight, dip solder, .172 saf3 = socket, straight, flex-circuit, .050 saf6 = socket, straight, flex-circuit, .093 saf9 = socket, straight, flex-circuit, .140 sap = socket, straight, pin termination, .150, connector saver saw24 = socket, straight, wire wrap, .375 saw40 = socket, straight, wire wrap, .625 sor7 = socket, right-angle, dip solder, .109, see page w-43. sor9 = socket, right-angle, dip solder, .140, see page w-43. sor11 = socket, right-angle, dip solder, .172, see page w-43. type of hardware ? plug facial seal gaskets and hoods; order separately or add q in part number. example: wg160pr9qj. see gaskets and hoods under next tab for instructions. sy = guide set sy = guide set sy-# = guide set, polarized sy-# = guide set, polarized syl = guide set, long syl = guide set, long jt = turning jackset, .500 j = fixed jackset jta = turning jackset, .200 jl = fixed jackset, long jtb = hex turning jackset, .200 jtc = turning jackset, .500 jtl = long turning jackset, .700 options ? option codes: add to the end of the part number. example: wg160pr9sy548. call factory for additional codes. -b82: termination face sealed against conformal coating. -342: remove .250 mounting ears. -d01: pre-tin contact terminations. (solder cup, wire wrap and flex circuit contacts are excluded.) -548: includes nuts bonded into hex recess in mounting holes. -g69: solder cups are fixed in an outward orientation, otherwise contacts can rotate. airborn, inc. ? 4321 airborn drive ? addison, tx 75001-0519 ph: (972)931-3200 fax: (972)931-9305 e-mail: info@airborn.com the interconnect solution source w series connectors w-42 plug: wg 160 pr7 sy receptacle: wg 160 sac sy 3 3 ? row connectors pc card to board or to pc card examples: wg-wg (160 & 208) wg208pr7sy wg208sacsy 0018
airborn, inc. ? 4321 airborn drive ? addison, tx 75001-0519 ph: (972)931-3200 fax: (972)931-9305 e-mail: info@airborn.com w series connectors 9916 w-43 the interconnect solution source size a b c d e f 160 2.850 3.075 6.400 5.900 2.600 2.500 208 3.650 3.875 8.000 7.500 3.400 3.300 wg-wg dimensions example: wg160sor11sy
|